Simpson Strong Tie SD #9 x 1-1/2″ Connector Screw 10 ct. SD9112R100

• Simpson Strong-Tie
• Strong-Drive SD CONNECTOR Screw
• Common Application: Simpson Strong-Tie Connectors
• Features:
• The Strong-Drive SD Connector screw is specifically designed to replace nails in certain Simpson Strong-Tie connectors; and is the only screw approved for that application. The load-rated SD screw has been tested and approved for use in many popular Simpson Strong-Tie products. In certain applications screws are easier and more convenient to install than nails; and the single-fastener load values achieved by the SD screw exceed those of typical 10d common or 16d common nails; respectively. In addition; the galvanized coating makes the SD screw ideal for both interior and most exterior conditions.
• Specifically designed to replace nails in certain Simpson Strong-Tie connectors; and is the only screw approved for that application. The #9 and #10 SD screws replace 10d and 16d nails respectively.
• Tested and approved for use in many of our best-selling connectors for both interior and exterior applications
• Ideal for use in connector applications where more control is desired or using a hammer is inconvenient
• 1/4 hex head reduces cam-out and is stamped with the Simpson Strong-Tie inin sign and the fastener size for easy identification after installation
• Shank is specifically designed to match the fastener holes in Simpson Strong-Tie connectors
• Patented serrated threads and sharp point make driving easy
• Optimized heat treating for ductility and strength
• The single-fastener load capacity of the SD9 exceeds the capacity of a 10d common nail; while the single-fastener load capacity of the SD10 exceeds that of the 16d common nail
• Hex driver included
• Mechanically-galvanized coating meets ASTM B695 Class 55; is recommended for use with certain preservative-treated woods and recognized as an alternate to hot-dip galvanized in ESR-3046; it is compliant with the 2006; 2009; and 2012 International Residential Code (2006 Section R319.3; 2009 Section R317.3.1).
• Model No.: SD9112R100
• Length (in.): 1 1/2
• Screw Size/ Nail Gauge: 9
• Drive: 1/4″ Hex Drive
• Head Type: Hex Head
• Point: Sharp Point
• Material/ Coating: Mechanically-Galvanized Coating – Class 55
• PKG Size: 10

“